Hierbij de bestanden voor beide custom wissels.
plaats alle bestanden (afbeeldingen & xml code) in de map 'Track'
sla onderstaande code op als: 9V Custom Crossover Left.8.xml (géén .txt) in de map 'Track'
<?xml version="1.0" encoding="UTF-8"?>
<part>
<Author>Ludo Soete</Author>
<!-- Based on the 7996.8XML file -->
<Description>
<en>Custom 9V Crossover Left</en>
<fr>Aiguillage 9V Croisé Gauche</fr>
</Description>
<!-- ImageURL></ImageURL -->
<!-- The margin of this part in stud for snaping on the grid, relative to the bitmap -->
<SnapMargin>
<left>0.5</left>
<right>0.5</right>
<top>0</top>
<bottom>0</bottom>
</SnapMargin>
<!-- list of connexion point (assuming that this part can connect to another one), the position of the connexion is in stud coord and relative to the origine defined above) -->
<ConnexionList>
<!-- type of connexion (0=none, 1=rail, 2=road, 3=monorail standard, 4=monorail short curve) -->
<!-- the center of this part in stud is x = 392 pix / 8 pixperstud / 2 = 24.5 and y = 192 / 8 / 2 = 12 -->
<!-- subtrackt 0.5 for the track connector fingers (x direction): 24.5 - 0.5 = 24 -->
<connexion>
<!-- Left upper corner -->
<type>1</type> <!-- type of connexion (see <BB install folder>/config/ConnectionTypeList.xml) -->
<position>
<x>-8.0</x>
<y>-8.0</y>
</position>
<angle>180</angle>
<angleToPrev>180.0</angleToPrev> <!-- how much angle between this connection and the prev one in this circular list -->
<angleToNext>180.0</angleToNext> <!-- how much angle between this connection and the next one in this circular list -->
<nextConnexionPreference>2</nextConnexionPreference> <!-- index (0-based) in that list for connecting the next part -->
<electricPlug>1</electricPlug>
</connexion>
<connexion>
<!-- Right upper corner -->
<type>1</type> <!-- type of connexion (see <BB install folder>/config/ConnectionTypeList.xml) -->
<position>
<x>24</x>
<y>-8.0</y>
</position>
<angle>0.0</angle>
<angleToPrev>180.0</angleToPrev> <!-- how much angle between this connection and the prev one in this circular list -->
<angleToNext>180.0</angleToNext> <!-- how much angle between this connection and the next one in this circular list -->
<nextConnexionPreference>0</nextConnexionPreference> <!-- index (0-based) in that list for connecting the next part -->
<electricPlug>-1</electricPlug>
</connexion>
<connexion>
<!-- Right bottom corner -->
<type>1</type> <!-- type of connexion (see <BB install folder>/config/ConnectionTypeList.xml) -->
<position>
<x>8.0</x>
<y>8.0</y>
</position>
<angle>0</angle>
<angleToPrev>180.0</angleToPrev> <!-- how much angle between this connection and the prev one in this circular list -->
<angleToNext>180.0</angleToNext> <!-- how much angle between this connection and the next one in this circular list -->
<nextConnexionPreference>0</nextConnexionPreference> <!-- index (0-based) in that list for connecting the next part -->
<electricPlug>-1</electricPlug>
</connexion>
<connexion>
<!-- Left bottom corner -->
<type>1</type> <!-- type of connexion (see <BB install folder>/config/ConnectionTypeList.xml) -->
<position>
<x>-24</x>
<y>8.0</y>
</position>
<angle>180</angle>
<angleToPrev>180.0</angleToPrev> <!-- how much angle between this connection and the prev one in this circular list -->
<angleToNext>180.0</angleToNext> <!-- how much angle between this connection and the next one in this circular list -->
<nextConnexionPreference>0</nextConnexionPreference> <!-- index (0-based) in that list for connecting the next part -->
<electricPlug>-1</electricPlug>
</connexion>
</ConnexionList>
</part>
sla onderstaande code op als: 9V Custom Crossover Right.8.xml (géén .txt) in de map 'Track'
<?xml version="1.0" encoding="UTF-8"?>
<part>
<Author>Ludo Soete</Author>
<!-- Based on the 7996.8XML file -->
<Description>
<en>Custom 9V Crossover Right</en>
<fr>Aiguillage 9V Croisé Droit</fr>
</Description>
<!-- ImageURL></ImageURL -->
<!-- The margin of this part in stud for snaping on the grid, relative to the bitmap -->
<SnapMargin>
<left>0.5</left>
<right>0.5</right>
<top>0</top>
<bottom>0</bottom>
</SnapMargin>
<!-- list of connexion point (assuming that this part can connect to another one), the position of the connexion is in stud coord and relative to the origine defined above) -->
<ConnexionList>
<!-- type of connexion (0=none, 1=rail, 2=road, 3=monorail standard, 4=monorail short curve) -->
<!-- the center of this part in stud is x = 392 pix / 8 pixperstud / 2 = 24.5 and y = 192 / 8 / 2 = 12 -->
<!-- subtrackt 0.5 for the track connector fingers (x direction): 24.5 - 0.5 = 24 -->
<connexion>
<!-- Left upper corner -->
<type>1</type> <!-- type of connexion (see <BB install folder>/config/ConnectionTypeList.xml) -->
<position>
<x>-24.0</x>
<y>-8.0</y>
</position>
<angle>180</angle>
<angleToPrev>180.0</angleToPrev> <!-- how much angle between this connection and the prev one in this circular list -->
<angleToNext>180.0</angleToNext> <!-- how much angle between this connection and the next one in this circular list -->
<nextConnexionPreference>2</nextConnexionPreference> <!-- index (0-based) in that list for connecting the next part -->
<electricPlug>1</electricPlug>
</connexion>
<connexion>
<!-- Right upper corner -->
<type>1</type> <!-- type of connexion (see <BB install folder>/config/ConnectionTypeList.xml) -->
<position>
<x>8</x>
<y>-8.0</y>
</position>
<angle>0.0</angle>
<angleToPrev>180.0</angleToPrev> <!-- how much angle between this connection and the prev one in this circular list -->
<angleToNext>180.0</angleToNext> <!-- how much angle between this connection and the next one in this circular list -->
<nextConnexionPreference>0</nextConnexionPreference> <!-- index (0-based) in that list for connecting the next part -->
<electricPlug>-1</electricPlug>
</connexion>
<connexion>
<!-- Right bottom corner -->
<type>1</type> <!-- type of connexion (see <BB install folder>/config/ConnectionTypeList.xml) -->
<position>
<x>24.0</x>
<y>8.0</y>
</position>
<angle>0</angle>
<angleToPrev>180.0</angleToPrev> <!-- how much angle between this connection and the prev one in this circular list -->
<angleToNext>180.0</angleToNext> <!-- how much angle between this connection and the next one in this circular list -->
<nextConnexionPreference>0</nextConnexionPreference> <!-- index (0-based) in that list for connecting the next part -->
<electricPlug>-1</electricPlug>
</connexion>
<connexion>
<!-- Left bottom corner -->
<type>1</type> <!-- type of connexion (see <BB install folder>/config/ConnectionTypeList.xml) -->
<position>
<x>-8</x>
<y>8.0</y>
</position>
<angle>180</angle>
<angleToPrev>180.0</angleToPrev> <!-- how much angle between this connection and the prev one in this circular list -->
<angleToNext>180.0</angleToNext> <!-- how much angle between this connection and the next one in this circular list -->
<nextConnexionPreference>0</nextConnexionPreference> <!-- index (0-based) in that list for connecting the next part -->
<electricPlug>-1</electricPlug>
</connexion>
</ConnexionList>
</part>
succes.
Ludo
custom wissels - afbeelding & xml code
Nieuw programma om mooie layouts uit te tekenen//New program to make layouts
Ga naar
- Annoucements
- ↳ Annoucements
- updates patricks legotreinensite&legotreinforum
- ↳ je zelf voorstellen // introduce yourself
- ↳ reclame forum
- ↳ updates legotrein forum
- ↳ updates patricks legotreinsite
- lego treinen // lego trains
- ↳ standaard duw&4.5v &12v trein//standard push&4.5v &12v trains
- ↳ standaard 9volt treinen // standard 9volt trains
- ↳ standaard RC treinen // standard RC trains
- ↳ standaard PF treinen //standard PF trains
- ↳ sporen//tracks
- ↳ wielassen voor treinen//bougies
- ↳ Mooie club layouts//Beautiful club layouts
- ↳ Mooie prive treinlayouts//Beautiful private train layouts
- ↳ andere dingen rond treinen//other things for trains
- ↳ MILS Modules
- ↳ MOC alleen Belgisch /only Belgian
- ↳ MOC alleen Nederlandse /only Dutch
- ↳ MOC treingebouwen // trainbuildings
- ↳ MOC Stoom locomotieven // Steam Locomotives
- ↳ MOC Diesel locomotieven //Diesel Locomotives
- ↳ MOC elektrische locomotieven //Electric Locomotives
- ↳ MOC Passagiers wagons // Passenger Cars
- ↳ MOC Goederen wagons // Freight Cars
- ↳ MOC onderhouds wagons//Maintenance of Way (MOW)
- ↳ lego trein films // legotrain films
- ↳ Lego films Digital Designer treinen //trains
- ↳ MOC Mini treinen 2&4 breed&Narrow-gauge 4-4-0//mini trains//
- lego city
- ↳ auto // automobile
- ↳ vrachtwagens // trucks
- ↳ schepen//Ships
- ↳ vliegtuigen//aircraft
- ↳ ander vervoer // other transport
- ↳ andere dingen voor stad//other things for city
- ↳ gebouwen // buildings
- ↳ modular houses
- ↳ vignettes
- LTCC (LEGO TRAIN CITY CREATORS) publiek
- ↳ wie zijn we LTCC
- ↳ wat doen we
- ↳ waar staan we
- ↳ aanvraag plaatsing layout
- met wat zijn we nu bezig//with what are we busy
- ↳ mocs
- ↳ project
- news
- ↳ Algemeen Lego® News //General Lego® News
- ↳ BeLug News
- ↳ https://ideas.lego.com
- ↳ Bricklink desiger program
- ↳ other news
- bricklink // brickshelf
- ↳ bricklink vragen
- ↳ brickshelf vragen
- gezocht-- vragen// sought-after--questions
- ↳ gezocht //looking for
- ↳ Gebruikte Lego-afkortingen//Acronyms & Terms
- ↳ vraag rond lego//question around lego
- ruilen-te koop // trade sell
- ↳ ruilen gebruikt // trade used
- ↳ ruilen nieuwstaat // trade new
- ↳ te koop gebruikt // for sale used
- ↳ te koop nieuw // for sale new
- tekenprogrammas//design programs
- ↳ MLCad
- ↳ Blue Bricks
- ↳ LDD 3.0 & 4.0
- ↳ Stud.io
- ↳ https://mecabricks.com
- ↳ mlcad&ldvieuw tekening//mlcad&ldvieuw drawings
- ↳ other
- nieuwste aankopen // newest acquisition
- ↳ promoties // promotions
- ↳ sets
- ↳ stukken // pieces
- lego films on the Internet
- ↳ lego films on the internet
- sites
- ↳ lego sites
- cafe
- ↳ other
- ↳ cafe
- ↳ echte treinfilms//real trainfilms
- ↳ films minituur treinen//movies miniature trains
- ↳ mooie niet lego sites // No related lego sites:
- archief
- ↳ Brick Tricks
- ↳ Castle
- ↳ Leger // Military
- ↳ Pirates
- ↳ Space
- ↳ Technic
- ↳ archief 2010 treigne mariembourg
- ↳ archief 2011 treigne-mariembourg
- ↳ BelTC
Wie is er online
Gebruikers op dit forum: Geen geregistreerde gebruikers en 3 gasten